S6D0144 TFT display driver library

The S6D0144 display controller is supported by the RAMTEX S6D0129 display driver library package.
Full GUI display driver C source code. Processor and C compiler independent.

S6D0144 display controller characteristics

Below is a brief introduction to the main characteristics for the S6D0144 RGB display controller (seen from a software driver design viewpoint).

For information about the S6D0144 driver software support please go to the library description.

S6D0144 device type

• COG RGB color display controller for use in small embedded systems with on-chip frame buffer and TFT screen driver.
• The S6D0144 supports TFT screens with a size up to 128 x 160 pixels (WxH)
• On-chip TFT driver with voltage generator

Frame buffer

• RGB pixel resolution (bits per pixel): 16-bit, 18-bit.
• S6D0144 frame buffer organization: 128 RGB pixels on scan line, 160 lines.

Processor interfaces on S6D0144

• S6D0144 parallel bus interface

  • Parallel bus types: 8080 bus type and 6800 bus type
  • Parallel bus size: 8-bit, 16-bit, 18 (32)-bit.
  • Addressing concept: Indexed bus interface (1 chip select pin + 1 address bit pin (Data/Command))

• Serial bus interfaces on S6D0144

  • SPI bus: 3-wire: /CS, SDIN, SCLK. SPI-3 first byte in CS frame contains: device code, DC, RW. 16 bit transmission frame, (SPI only use 16 bits pr pixel mode)
• The bus interfaces are all supported by the S6D0144 display driver software package.

Special S6D0144 hardware features:

• 0-180, 90-270 degree frame buffer rotation with hardware support. Portrait mode, landscape mode.
• Full driver software support.

Display controller vendor

• SAMSUNG ELECTRONICS CO. LTD. https://www.samsung.com