S6B33BF LCD display driver library
The S6B33BF display controller is supported by the RAMTEX S6D0129 display driver library package.
Full GUI display driver C source code. Processor and C compiler independent.
More info about Graphic RGB Color library (S6D0129 family)
S6B33BF display controller characteristics
Below is a brief introduction to the main characteristics for the S6B33BF RGB display controller (seen from a software driver design viewpoint).
For information about the S6B33BF driver software support please go to the library description.
S6B33BF device type
- COG RGB color display controller for use in small embedded systems with on-chip frame buffer and LCD screen driver.
- The S6B33BF supports LCD screens with a size up to 144 x 177 pixels (WxH)
- On-chip LCD driver with voltage generator and software controlled contrast regulation.
Frame buffer
- RGB pixel resolution (bits per pixel): 16-bit.
- S6B33BF frame buffer organization: 144 RGB pixels on scan line, 177 lines.
Processor interfaces on S6B33BF
S6B33BF parallel bus interface
- Parallel bus types: 8080 bus type
- Parallel bus size: 8-bit, 16-bit.
- Addressing concept: Indexed bus interface (1 chip select pin + 1 address bit pin (Data/Command))
Serial bus interfaces on S6B33BF
- SPI bus: 4-wire: /CS, DC, SDIN, SCLK.
- SPI bus: 3-wire: /CS, SDIN, SCLK.
- The bus interfaces are all supported by the S6B33BF display driver software package.
Special S6B33BF hardware features:
- 0-180, 90-270 degree frame buffer rotation with hardware support. Portrait mode, landscape mode.
- Software controlled intensity regulation.
- Full driver software support.
Display controller vendor
- SAMSUNG ELECTRONICS CO. LTD. https://www.samsung.com